start stop button RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
0-6Illustrated table of contents
LEFT-HAND DRIVE (LHD) MODEL
JV\f0223X
\b. Vehicle Dynamic \fontrol (VD\f) OFF switch*(P.5-24) or Electronic Stability Program (ESP)
OFF switch* (P.5-25)
2. Parking space measurement switch* (P.5-32)
3. Headlight, fog light* and turn signal switch (P.2-29)
4. Steering-wheel-mount\Jed controls (left side)* — Audio control* (P.4-54)
— Bluetooth
ŠHands-Free Phone System con- trol (without navigation system)* (P.4-56)
— Bluetooth
ŠHands-Free Phone System con-
trol (with navigation system)**
5. Driver’s front-impact air bag/Horn (P.\b-25, P.2-36)
6. Meters and gauges (P.2-6)
7. Steering-wheel-mount\Jed controls (right side)* — \fruise control switches* (P.5-28) — Speed limiter switches* (P.5-26)
8. Wiper and washer switch (P.2-33)
9. \fenter ventilator (P.4-2)
\b0. Rear window defogger switch* (P.2-35)
\b\b. Hazard indicator flasher switch* (P.2-36)
\b2. Heater and air conditioner* control (P.4-3)
\b3. Audio system* (P.4-8 or Navigation system**)
\b4. Passenger’s front-impact air bag* (P.\b-25)
\b5. Upper instrument box* (P.2-40)
\b6. Side ventilator (P.4-2)
\b7. Headlight aiming control switch* (P.2-3\b)
\b8. Outside rearview mirror control switch* (P.3-2\b)
\b9. Fuel filler lid release handle (P.3-\b9)
20. Hood lock release handle (P.3-\b8)
2\b. Stop/Start System OFF switch* (P.5-23)
22. Tilting steering wheel lock lever* (P.3-20)
23. Ignition switch (model without Intelligent Key system)/steering lock (P.5-5)
24. Push-button ignition switch (model with Intelli- gent Key system) (P.5-6)
25. \fup holder (P.2-40)
26. Selector lever or Shift lever — Automatic Transmission (AT) model (P.5-\b\b)
— \fontinuously Variable Transmission (\fVT)
model (P.5-\b4)
— Manual Transmission (MT) model (P.5-\b7)
27. Power outlet*/USB/AUX connector* (P.2-39, P.4-55)
28. Glove box (P.2-40)
*: if equipped
**: Refer to the separate Navigation Owner’s Manual (if
equipped) .
INSTRUMENT PANEL
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RIGHT-HAND DRIVE (RHD) MODEL (Type A)
\fVC022\bX
1. Side ventilator (P.\b-2)
2. Upper instrument box* (P.2-\b0)
3. Passenger’s front-impact air bag* (P.1-25)
\b. Audio system* (P.\b-8 or Navigation system**)
5. Rear window defogger switch* (P.2-35)
6. Hazard indicator flasher switch (P.2-36)
7. Heater and air conditioner* control (P.\b-3)
8. Center ventilator (P.\b-2)9. Wiper and washer switch (P.2-33) or Headlight,
fog light and turn signal switch (P.2-29)
10. Steering-wheel-mounted\e controls (left side)* — Audio control* (P.\b-5\b)
— Bluetooth
ŠHands-Free Phone System con-
trol (without navigation system)* (P.\b-56)
— Bluetooth
ŠHands-Free Phone System con-
trol (with navigation system)** 11. Meters and gauges (P.2-6)
12. Driver’s front-impact air bag*/Horn (P.1-25,
P.2-36)
13. Steering-wheel-mounted\e controls (right side)* — Cruise control switches* (P.5-28)
— Speed limiter switches* (P.5-26)
1\b. Headlight, fog light* and turn signal switch (P.2-29) or Wiper and washer switch (P.2-33)
15. Parking space measurement switch* (P.5-32)
16. Vehicle Dynamic Control (VDC) OFF switch* (P.5-2\b) or Electronic Stability Program (ESP)
OFF switch* (P.5-25)
17. Fuse box (P.8-27)
18. Glove box (P.2-\b0)
19. Power outlet*/USB/AUX connector* (P.2-39, P.\b-55)
20. Selector lever or Shift lever — Automatic Transmission (AT) model (P.5-11)
— Continuously Variable Transmission (CVT)
model (P.5-1\b)
— Manual Transmission (MT) model (P.5-17)
21. Cup holder (P.2-\b0)
22. Push-button ignition switch (model with Intelli- gent Key system) (P.5-6)
23. Tilting steering wheel lock lever* (P.3-20)
2\b. Ignition switch (model without Intelligent Key system)/steering lock (P.5-5)
25. Stop/Start System OFF switch* (P.5-23)
26. Hood lock release handle (P.3-18)
27. Fuel filler lid release handle (P.3-19)
28. Outside rearview mirror control switch* (P.3-21)
29. Headlight aiming control switch* (P.2-31)
*: if equipped
**: Refer to the separate Navigation Owner’s Manual (if
Illustrated table of contents0-7
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-2Instruments and controls
LEFT-HAND DRIVE (LHD) MODEL
JVC\f223X
1\b Vehicle Dynamic Control (VDC) OFF switch* orElectronic Stability Program (ESP) OFF switch*
2\b Parking space measurement switch*
3\b Headlight, fog light* and turn signal switch
4\b Steering-wheel-mou\Cnted controls (left side)* — Audio control*
— Bluetooth
ŠHands-Free Phone System con-
trol (without navigation system)* — Bluetooth
ŠHands-Free Phone System con-
trol (with navigation system)**
5\b Driver’s front-impact air bag/Horn
6\b Meters and gauges
7\b Steering-wheel-mou\Cnted controls (right side)* — Cruise control switches*
— Speed limiter switches*
8\b Wiper and washer switch 9\b Center ventilator
1\f\b Rear window defogger switch*
11\b Hazard indicator flasher switch*
12\b Heater and air conditioner* control
13\b Audio system* or Navigation system**
14\b Passenger’s front-impact air bag*
15\b Upper instrument box*
16\b Side ventilator
17\b Headlight aiming control switch*
18\b Outside rearview mirror control switch*
19\b Fuel filler lid release handle
2\f\b Hood lock release handle
21\b Stop/Start System OFF switch*
22\b Tilting steering wheel lock lever*
23\b Ignition switch (model without Intelligent Key
system)/steering lock
24\b Push-button ignition switch (model with Intelli- gent Key system)
25\b Cup holder
26\b Selector lever or Shift lever — Automatic Transmission (AT) model
— Continuously Variable Transmission (CVT)
model
— Manual Transmission (MT) model
27\b Power outlet*/USB/AUX connector*
28\b Glove box
*: if equipped
**: Refer to the separate Navigation Owner’s Manual (if
equipped) \b
INSTRUMENT PANEL
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RIGHT-HAND DRIVE (RHD) MODEL (Type A)
\fVC022\bX
1. Side ventilator
2. Upper instrument box*
3. Passenger’s front-impact air bag*
\b. Audio system* or Navigation system**
5. Rear window defogger switch*
6. Hazard indicator flasher switch
7. Heater and air conditioner* control
8. Center ventilator9. Wiper and washer switch or Headlight, fog light
and turn signal switch
10. Steering-wheel-mounted\e controls (left side)* — Audio control*
— Bluetooth
ŠHands-Free Phone System con-
trol (without navigation system)*
— Bluetooth
ŠHands-Free Phone System con-
trol (with navigation system)** 11. Meters and gauges
12. Driver’s front-impact air bag*/Horn
13. Steering-wheel-mounted\e controls (right side)*
— Cruise control switches*
— Speed limiter switches*
1\b. Headlight, fog light* and turn signal switch or Wiper and washer switch
15. Parking space measurement switch*
16. Vehicle Dynamic Control (VDC) OFF switch* or Electronic Stability Program (ESP) OFF switch*
17. Fuse box
18. Glove box
19. Power outlet*/USB/AUX connector*
20. Selector lever or Shift lever — Automatic Transmission (AT) model
— Continuously Variable Transmission (CVT)
model
— Manual Transmission (MT) model
21. Cup holder
22. Push-button ignition switch (model with Intelli- gent Key system)
23. Tilting steering wheel lock lever*
2\b. Ignition switch (model without Intelligent Key system)/steering lock
25. Stop/Start System OFF switch*
26. Hood lock release handle
27. Fuel filler lid release handle
28. Outside rearview mirror control switch*
29. Headlight aiming control switch*
*: if equipped
**: Refer to the separate Navigation Owner’s Manual (if
equipped) .
Instruments and controls2-3
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the Power button.
Volume control:
To control the volume, turn the VOL control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
MENU button:
To change the audio settings (BASS, TREBLE,
FADER, BALA\bCE, BEEP and CLOCK) , push the
button to select the mode while the CD or radio is
on.
Push the
button until the desired mode appears
on the display.
BASS ?TREBLE ?FADE ?BALA\bCE ?BEEP
O\b ?CLOCK
Audio setting
Push the SEEK/TRACK button (
or) or
TU\bE/FF·REW/FOLDER button (or) to
adjust while the following audio setting is displayed.
:( í) to decrease / (+) to increase
:(í) to decrease / (+) to increase
: (F) to front fade / (R) to rear fade
: (R) to right balance / (L) to left balance
Once the audio settings are set to the desired level,
push the
button until the radio or CD display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
Beep setting
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired mode
is displayed. This turns on or off the beep sound when
audio buttons are pushed.
Clock setting
To display the clock on the screen, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonorto select CLOCK O\b.
1. Turn the clock display on.
2. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
3. To adjust the hours, push the SEEK/TRACK button
or.
4. To adjust the minutes, push the TU\bE/FF·REW/ FOLDER button
or.
If no user input is detected for 10 seconds, or when
the \fME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
SAA3123
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
When the
button is pushed while a CD with a title
is being played, the display will change as follows:
Heater and air conditioner, and audio system4-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
16. Radio memory buttons (1 - 6\f
17. ME\bU button
Audio main operation
The audio system operates when the ignition switch is
in the “ACC” or “O\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD\f
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the Power button.
Volume control:
To control the volume, turn the VOL control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
Sound preference button:
To enter the audio mode (radio, CD or AUX\f , push the
button. When no CD is loaded and AUX is not
connected , the audio system will automatically switch
to the radio mode.
To change the audio settings (BASS, TREBLE,
FADER, BALA\bCE\f , push the
button to select
the mode.
BASS ?TREBLE ?BALA\bCE ?FADER ?BASS
To adjust each audio setting, push the SEEK/TRACK
button or Tune button. BASS: (í\f to decrease / (+\f to increase
TREB(LE\f: (í\f to decrease / (+\f to increase
BAL
(A\bCE\f:
(R\f to right balance / (L\f to left balance
FADE(R\f: (F\f to front fade / (R\f to rear fade
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
To change the audio settings (BEEP and CLOCK\f ,
push the
button to select the mode while the CD
or radio is on.
Push the
button until the desired mode appears
on the display.
BEEP O\b ?CLOCK
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired mode
is displayed. This turns on or off the beep sound when
audio buttons are pushed.
Clock display:
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK O\b
or OFF appears on the display while the audio
system is on.
2. Push the SEEK/TRACK button
oror
TU\bE/FF·REW/FOLDER buttonorto
select CLOCK O\b. Clock adjustment:
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
2. To adjust the hours, push the SEEK/TRACK button
or.
3. To adjust the minutes, push the TU\bE button
or.
If no user input is detected for 10 seconds, or when
the “ME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
JVH0002X
The audio system operates when the ignition switch is
in the “ACC” or “O\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
Heater and air conditioner, and audio system4-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operation
JVH0002X
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
/button:
When the
/button is pushed while the audio
s\bstem is off, the audio s\bstem will turn on and the
radio will turn on.
When the
/button is pushed while another
audio source is pla\bing, the another audio source will
turn off and the radio will turn on.
\fo change the radio bands, push the
/button
until the desired band (FM1, FM2, or AM) is displa\bed.
\fhe FM stereo indicator, “S\f” will displa\b during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automaticall\b change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequenc\b
manuall\b, push the
orbutton until the desired
frequenc\b is achieved.
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
orbutton. When the
s\bstem detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
button. When the
s\bstem detects a broadcasting station, it will stop at
the station.
button:
When the
button is pushed, the s\bstem will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
\fhe audio s\bstem can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
\fo store the station frequenc\b:
1. \fune to the desired broadcasting station fre- quenc\b b\b using the
orbutton.
2. Push and hold a memor\b button (1 - 6) until a beep sounds.
3. \fhe switch number and frequenc\b will appear on the displa\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for all other memor\b buttons.
Push a memor\b button (1 - 6) to select a desired
memor\b.
If the batter\b cable is disconnected, or if the audio fuse
blows, the radio memor\b will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
\fhe audio s\bstem can store up to 6 FM station
frequencies and 6 AM station frequencies.
\fo store the station frequenc\b automaticall\b, push and
hold the
button until a beep sounds. \fhe station
will be automaticall\b stored in the “AU\fO.P” memor\b.
\fhe displa\b indicates “AP-**”.
Heater and air conditioner, and audio system4-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the PWR button.
Volume control:
To control the volume, turn the VOLUME control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
MENU button:
To change the audio settings, push the
button to
select the mode while the CD or radio is on.
Push the
button until the desired mode appears
on the display.
BASS ?TREBLE ?FADE ?BALA\bCE ?BEEP ?
CLOCK ?BASS
Push the SEEK/TRACK button (
or) or
TU\bE/FF·REW/FOLDER button (or) to
adjust the audio settings.
:( í) to decrease / (+) to increase
:(í) to decrease / (+) to increase
: (F) to front fade / (R) to rear fade
: (R) to right balance / (L) to left balance
Once the audio settings are set to the desired level, push the
button until the radio or CD display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired
mode is displayed. This turns on or off the beep sound
when audio buttons are pushed.
Clock display:
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK O\b
or OFF appears on the display while the audio
system is on.
2. Push the SEEK/TRACK button
oror
TU\bE/FF·REW/FOLDER buttonorto select CLOCK O\b.
Clock adjustment:
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
2. To adjust the hours, push the SEEK/TRACK button
or.
3. To adjust the minutes, push the TU\bE/FF·REW/ FOLDER button
or.
If no user input is detected for 10 seconds, or when
the \fME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
JVH0012X
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
When the
button is pushed while a CD with a title
is being played, the display will change as follows:
Heater and air conditioner, and audio system4-31
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-32Heater and air conditioner, and audio system
CD:
CD with MP3 or WMA:
SEEK/TRACK/FILE button:
When the
\futton (lo\bated on the left side) is
pushed while a CD is \feing played, the present tra\bk
will \fe advan\bed and move to the next tra\bk. Push
the
\futton several times to skip forward tra\bks.
The CD will advan\be the num\fer of times the \futton is
pushed. When the last tra\bk of the CD is forwarded,
the first tra\bk will \fe played.
When the
\futton is pushed while a CD is \feing
played, the present tra\bk will start over from the
\feginning of the \burrent tra\bk. Push the
\futton
several times to skip \fa\bk tra\bks. The CD will rewind
the num\fer of times the \futton is pushed. When the
first tra\bk of the CD is rewound, the last tra\bk will \fe
played.
TUNE/FF·REW/FOLDER button:
When the
or\futton (lo\bated on the
right side) is pushed and held while a CD is \feing
played, the CD will \fe played while forwarding or
rewinding. When the \futton is released, the CD will
return to the normal play speed.
When the
\futton oris pushed while a
CD with MP3 or WMA is \feing played, the first tra\bk in
the next or the previous folder will \fe played.
button:
When the
\futton is pushed while a CD is \feing
played, the first 10 se\bonds of all the tra\bks will \fe
played.
When the
\futton is pushed again, the CD will
return to normal play from the tra\bk whi\bh is playing.
(Repeat) button:
To \bhange the play settings, push the
\futton to
sele\bt the mode.
CD:
RPT DISC ?RPT TRACK
CD with MP3 or WMA:
RPT DISC ?RPT FOLDER ?RPT TRACK
RPT DISC:
All the tra\bks of the CD will \fe played \bontinuously in
sequential order. The display indi\bates no sym\fol
mark. While the
\futton is pushed, the display
indi\bates “RPT DISC”.
RPT TRACK:
The sele\bted tra\bk of the CD will \fe played \bon-
tinuously. While the
\futton is pushed, the display
indi\bates “RPT TRACK”.
RPT FOLDER:
All the tra\bks of sele\bted folder will \fe played
\bontinuously in sequential order (CD with MP3 or
WMA only) . While the
\futton is pushed, the
display indi\bates “RPT FOLDER”.
(Random) button:
To \bhange the play sequen\be, push the
\futton to
sele\bt the mode.
CD:
RDM DISC ?RPT DISC
CD with MP3 or WMA:
RDM DISC ?RDM FOLDER ?RPT DISC
RPT DISC:
All the tra\bks of the CD will \fe played \bontinuously in
sequential order. The display indi\bates no sym\fol
mark. While the
\futton is pushed, the display
indi\bates “RPT DISC”.
RDM DISC:
All the tra\bks or folders (CD with MP3 or WMA only) of
the CD will \fe played \bontinuously in random order.
While the
\futton is pushed, the display indi\bates
“RDM DISC”.
RDM FOLDER:
All the tra\bks of the sele\bted folder will \fe played
\bontinuously in random order (CD with MP3 or WMA
only) . While the
\futton is pushed, the display
indi\bates “RDM FOLDER”.
(Scroll) button:
When the title is displayed \fut it is a long one, the
whole title is not shown in the display. In this \base,
push the \futton to s\broll the title. When the title is
s\brolled to the end of it, the display will stop moving
and return to the first \bondition.
&RQGLWLRQ